Apply for Credit | Get a Quote | Help | Talk to us direct: (310) 537-8190

Left Nav Image
Empire Packaging & Displays1161 E Walnut St
Carson, CA 90746
Phone: (310) 537 -8190

Box Styles

Box Style Definitions and Abbreviations

The majority of box styles fall into one of the following general categories: Slotted Boxes, Telescope Boxes, Folders, Rigid (or Bliss) Boxes, Self-Erecting Boxes and Interior Forms. In addition, corrugated boxes can be custom designed to meet the specific needs of the customer.

Slotted Boxes are generally made from a single piece of corrugated fiberboard. The blank is scored and slotted to permit folding. Boxes are shipped and stored flat and assembled as needed by the user. Some of the most common types include:

Regular Slotted Container (RSC) — All flaps have the same length, and the two out flaps are one-half the container’s width, so that they meet at the center of the box when folded. The RSC is the most common box style.

Half Slotted Container (HSC) — Same as a Regular Slotted Container (RSC), but without one set of flaps.

Overlap Slotted Container (OSC) — All flaps have the same length; the outer flaps overlap by one inch or more. The box is usually closed with staples driven through the overlap area. This style of box is used when the length of the box is considerably greater than the width, resulting in a long gap between the inner flaps. The sealed overlap helps to keep the outer flaps from pulling apart.

Full overlap Slotted Container (FOL) — All flaps have the same length (the width of the box). When closed, the outer flaps come within one inch of complete overlap. This style is especially resistant to rough handling and provides extra product cushioning and stacking strength.

Center Special Slotted Container (CSSC) — Inner and outer flaps are cut to different lengths. Both sets of flaps meet at the center of the box. This style is especially strong because both the top and bottom have double the thickness of corrugated board. The inner flaps, with no gap, provide a level base for products.

Center Special Overlap Slotted Container (CSO) — All flaps have the same length (one-half the length of the box). The length of the box can be no more than twice its width. The inner flaps meet at the center of the box, providing a level base and full top protection.

Center Special Full Overlap Slotted Container (SFF) — Inner and outer flaps are cut to different lengths. When closed, the inner flaps meet at the center of the box, and out flaps fully overlap. With three full layers of combined board over the entire top and bottom, this style provides extra cushioning and stacking strength.

Telescope Boxes usually consist of top and bottom pieces that fit over each other. “Telescope Style” generally describes a box where the cover extends over at least two-thirds of the depth of the bottom piece, where a Box with Cover indicates a box where the cover extends less than two-thirds of the depth. Common types include:

Full Telescope Design Style Container (FTD) and Design Style Container with Cover (DSC) — Two-piece boxes made from two scored and slotted blanks (trays).

Full Telescope Half Slotted Container (FTHS) — The two-piece body is made from two half-slotted containers.

Trays are formed from a single piece of combined board, with the design featuring an unbroken bottom and several layers of corrugated in the end panels. They are frequently used as inner containers for parts, delicate produce or mail pieces.

Rigid (Bliss) Boxes include two identical end panels and a body that folds to form the two side panels, an unbroken bottom and the top. Flaps are used to form the joints. Once the joints are sealed, the box is considered rigid.

Self-Erecting Boxes typically feature regular slotted container or telescope-style tops.

Tubes are scored rectangles, folded to form a multi-sided structure.

Folders consist of one or more pieces of combined board, with an unbroken bottom surface and scored to fold around the product. Popular styles include:

One Piece Folder (OPF) — One piece of board is cut so that it provides a flat bottom, with flaps forming the sides and ends, and extensions of the side flaps meeting to form the top.

Five Panel Folder (FPF) — A single cut and scored piece features a fifth panel used as the closing flap, completely covering a side panel.

Interior Forms include a wide variety of build-ups, dividers, partitions and other inner packing pieces. They can be used to separate or cushion products, to strengthen the box or to fill voids. They may be simple rectangle, scored, slotted or die-cut shapes. Common formats include:

Pads are plain shapes of corrugated or solid fiberboard, used to fill spaces or separate layers or sections of products.

Inner Pack Forms are usually die cut fiberboard pieces designed to position and support products away from the walls of the box for added protection.

Partitions (or Dividers) provide a separate cell for each item in a box. Primarily used for packaging glassware or other fragile items.

Inner Packing Pieces are scored and/or folded pieces of fiberboard used for cushioning, suspension and separation, and to fill voids.